{"product_id":"st-xta-plus-3-mini-cooper-s-coilover-kit","title":"ST XTA Plus 3 Coilover Kit –  MINI Cooper base, S and JCW","description":"\u003cp\u003eMINI Cooper 2014+ base, S and JCW, 2.0L L4 B46A20M0, FWD hatchback.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lowering: 0.8\" to 1.8\"\u003c\/li\u003e\n\u003cli\u003eRear Lowering: 0.8\" to 1.8\"\u003c\/li\u003e\n\u003cli\u003eVersion: XTA plus 3\u003c\/li\u003e\n\u003cli\u003eDamping adjustment: Rebound and Compression Damping\u003c\/li\u003e\n\u003cli\u003eMaterial: Galvanized Steel\u003c\/li\u003e\n\u003cli\u003eVehicle has electronic damper: No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Conditions – Without EDC (18202208AG)\u003c\/h3\u003e\n\u003cp\u003eAll vehicles equipped with the EDC system (electronic damper control) are NOT APPLICABLE\u003c\/p\u003e\n\u003cp\u003eFor rear axle camber adjustment we recommend the installation of the car specific adjustable control arm set from KW. KW Part-no. 68510131\u003c\/p\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eST XTA plus 3 COILOVERS\u003c\/p\u003e\n\u003cp\u003eThe ST XTA plus 3 coilover kit gives your car maximum performance for the road and the tools you need for any challenge.\u003c\/p\u003e\n\u003cp\u003eFrom the factory, the ST XTA plus 3 coilover kit is equipped with KW dampers that are adjustable in high- and low-speed compression as well as adjustable rebound damping. With 24 clicks of adjustment for each, high speed and low speed compression damping and 18 clicks of rebound adjustment, your suspension knows no limits. It doesn’t matter if you bolt in an aftermarket roll cage, weld in a cage, upgrade to spherical bushings or changed wheel loads – the ST XTA plus 3 coilover has what it takes to keep your car dialed! Of course, the ST XTA plus 3 also includes a parts approval certificate, race springs and solid aluminum uniball top mounts (with adjustment when necessary).\u003c\/p\u003e\n\u003cp\u003eEasy lowering adjustment\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA plus 3 coilovers due to the type of construction.\u003c\/p\u003e\n\u003cp\u003eKW Engineering: Exclusive for ST suspension\u003cbr\u003eThe high-quality ST XTA plus 3 coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cp\u003e- Latest 3-way damping adjustable technology for maximum longevity\u003cbr\u003e- Reduced system friction for effective damping adjustment\u003cbr\u003e- Individual lowering within the tested height adjustment range\u003cbr\u003e- Front and rear axle (when possible) with thread adjustment\u003cbr\u003e- Galvanized coilover struts with additional coating for an optimized corrosion protection\u003cbr\u003e- Complete solution with adjustable spring plate, race spring system and elastomer bump stops with dust protection\u003cbr\u003e- Solid Aluminum uniball top mounts (camber adjustable depending on application)\u003cbr\u003e- 3-way adjustable dampers:\u003cbr\u003e18 clicks low speed rebound damping\u003cbr\u003e24 clicks low speed compression damping\u003cbr\u003e24 clicks high speed compression damping\u003c\/p\u003e\n\u003cp\u003ePricing is for standard ST yellow springs (RAL 1021), without custom markings or optional spring packages. Personalization is not included.\u003c\/p\u003e\n\u003ch3\u003eWith EDC Variant (18202208AH)\u003c\/h3\u003e\n\u003cp\u003eOnly for vehicles with electronic dampers. Electronic damping control must be deactivated using KW deactivation kit 68510477. Confirm whether the deactivation kit must be ordered separately. KW rear camber control arm set 68510131 is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2014+ Mini Cooper F56 2-Door incl. Base, S, JCW\u003c\/span\u003e\u003c\/p\u003e","brand":"Modded Mini","offers":[{"title":"Without EDC","offer_id":42948280647765,"sku":"18202208AG","price":2799.0,"currency_code":"USD","in_stock":true},{"title":"With EDC","offer_id":42948280680533,"sku":"18202208AH","price":2799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0104\/3922\/9525\/files\/18202208AG_001.jpg?v=1788610792","url":"https:\/\/moddedmini.com\/products\/st-xta-plus-3-mini-cooper-s-coilover-kit","provider":"Modded Mini","version":"1.0","type":"link"}